Learn how to make simple DIY beeswax wraps that are a perfect, eco-friendly way to store and transport food. These wraps are great for sandwiches, covering dishes, wrapping up loaves of bread, and much more.
All you need for all-natural food storage are a few glass storage containers and a small collection of beeswax wraps.
These are a great, reusable alternative to plastic wrap. Use them to cover a plate or bowl that doesn’t have a lid.
With the warmth of your hand, the beeswax molds to whatever shape you need and creates an almost airtight seal, so that the food inside can stay fresh.
These are great to wrap sandwiches, blocks of cheese, sliced veggies, or that half-eaten apple your toddler left on his highchair that you know they will want later.
Tips For Making Beeswax Wraps
- Put the paint brush on the baking sheet, into the oven with the wraps, so the wax doesn’t harden on the brush between batches.
- The wax will stick to the brush and will be very hard or impossible to remove, so make sure to use a cheap brush you don’t mind tossing.
- It is tempting to turn the oven higher that 170 degrees to melt the beeswax faster, but beeswax is flammable and melts at 147, so a low temperature is suggested.
- The wraps need a place to dry. Make sure to get that set up before starting the project.
This post contains affiliate links, which means I make a small commission at no extra cost to you. See my full disclosure here.
Benefits of Using Reusable Food Wraps
Eco-friendly: Since they can be used over and over again, they are a great eco-friendly option.
Help reduce plastic use: Plastic is such a problem in today’s world, so swapping out plastic wrap for these reusable food wraps is one way to reduce plastic.
Save money: Instead of spending money over and over again on plastic wrap, swapping out for this reusable option can help you save money.
Compostable: Once your wrap has seen better days and needs replacing, rather than toss it in the trash, you can put it in the compost as long as you use 100% cotton.
Keeps food fresh: Which in turn saves you money. Less food wasted, less money spent, and in today’s day and age, we all could use some help spending less on food.
FAQ:
What kind of fabric should I use?
Cotton fabric should be used. I’ve also tried it with flannel, but it was pretty much impossible to spread the wax.
Do you need pine resin to make beeswax wraps?
No. I’ve made these multiple times and just use beeswax. No pine resin necessary.
How much beeswax is needed to make a wrap?
About 1 oz of beeswax per wrap. This tutorial uses 5 oz of beeswax to make five 12″x12″ wraps.
How long will these last?
These beeswax wraps will last for up to one year with proper care and cleaning.
Can beeswax wraps go in the microwave?
No. Since beeswax melts, it is not recommended for use in the microwave as you will ruin the wraps.
Materials you will need:
1 yard 100% cotton fabric
5 ounces beeswax, grated or pellets
Parchment paper
Tools you will need:
Baking sheet
Small paint brush – a cheap one you don’t mind tossing
Iron (if using the iron method)
Tools for hanging the wraps – I like to string up some twine and use clothespins.
How To Make Beeswax Wraps
Wash and dry fabric before starting this project.
Preheat oven to 170 degrees.
Cut out fabric into 12″ by 12″ squares, or whatever size you would like. This tutorial will make 5 12″ by 12″ square wraps.
Iron fabric so it is nice and flat.
Place one square piece of fabric on a parchment lined baking sheet.
Sprinkle the fabric with grated beeswax or pellets.
Bake in the oven for about 7 minutes or until melted.
With a paint brush, wipe the melted beeswax around the fabric to cover any spots that aren’t coated with beeswax yet. Use a cheap paint brush that you don’t mind tossing, because the beeswax will stick to the brush, and it is nearly impossible to remove.
Put the baking sheet back in the oven for another couple of minutes to ensure that everything is melted evenly.
Once melted, immediately remove the wrap from the baking sheet so that the beeswax doesn’t harden and stick. Don’t wait, because it will happen pretty much instantly.
Hang the beeswax fabric on a clothesline for a few minutes, or until the wax has fully hardened.
Repeat the process with all five fabric pieces.
Optional: To create airtight sandwich storage, sew a large button near the top-center area of one of the wraps. Fold it around the sandwich and secure shut with jute twine.
How to Make Beeswax Wraps with an Iron:
Wash and dry fabric.
Cut to desired size.
Turn the iron on the cotton setting.
Place a piece of parchment paper (a few inches larger on all sides than your fabric) down on an ironing board.
Place the fabric on top of the parchment paper.
Sprinkle the grated beeswax over the fabric as evenly as possible. It does’t have to be too precise.
Add a second piece of parchment paper over the fabric and beeswax. It needs to be larger than the fabric because you do not want beeswax leaking out from behind the parchment and getting stuck on the iron.
Place preheated iron on top of the parchment paper, beeswax, fabric and parchment paper sandwich. Allow the iron to melt the beeswax into the fabric for a few seconds before moving it to the next section.
Continue moving the iron around slowly until all the beeswax is melted. You can use the iron to push the beeswax around, as well.
Once all the beeswax is melted, check under the parchment paper to see if any parts of the fabric are missing beeswax.
Sprinkle beeswax on any areas without, cover once more with the parchment paper, and melt with the iron, repeating the same process.
Peel the wrap off of the parchment paper and hang to dry for just a few
Caring, Cleaning, and Maintaining Beeswax Wraps
- Wash the wraps in cold water with a mild soap. Never use hot water, as the beeswax will melt and break the airtight seal on the fabric.
- Allow to dry before each use.
- Beeswax may discolor with contact with food and it’s totally normal.
- Not recommended for direct contact with super acidic foods, as it can break down the beeswax.
Find More Handmade Home Projects:
- How To Make Beeswax Taper Candles
- DIY Pot Holders
- Japanese Apron Tutorial With Free PDF Pattern
- Macrame Plant Hanger DIY
- DIY Dried Orange And Eucalyptus Wreath
I found that when I made my beeswax wraps and tried fold them there was a ton of beeswax residual that flaked off. Like ALOT. What did I do wrong or how can I fix this?
Hmmm I’m wondering if maybe the beeswax was on the fabric too thick.
Do you do both sides?
Yes
I am loving your tutorials!! Love your channel as well.
i love beeswax wraps! i just found out you can make them.
thank you for posting this Lisa!
Have you found one method works than the other. Could I use cotton Muslim?
Going to try this tomorrow! Thanks for the tutorial 🙂 Did you lay a piece of scrap cloth under them while they were hanging to cool off, do they drip?
Does the beeswax go through to the other side of the fabric, meaning that the process does not need to be repeated on the other side? What a cool, seemingly simple idea & I love your choice of fabric!
I think it soaks through the fabric during the melting process. I’ve used 100% cotton fabric to soak castor oil on my foot and the oil soaked right through the fabric. So my guess is that you don’t need to do it to both sides because of that. Just my guess though!
Do you do both sides of cloth?
Thanks for the instructions! Do you coat both sides of the fabric with bees wax?
Other directions I’ve read show only 1 side with beeswax applied
Lisa, these are brilliant! Can’t wait to make some for my family. I’d love to be able to stop using so much plastic wrap. Do you have any tips for how you store them when you’re not using them? Flat in a drawer? Clipped to a specific line? Thanks, Lisa.
I roll mine into tubes and store them upright in an extra large coffee cup