Learn how to sew a cross back apron for women. Cut list, pocket placement guide and video tutorial give you everything you need to make this simple sewing project.
This sewing tutorial is on my list of ‘waiting for spring’ projects. I don’t know about you, but I am dreaming of gardens, pools and bare feet.
This cross back apron pattern has been a highly requested project. I showed you how to make the same cross back apron for girls and I had so many people say, “But, what if I want one for myself?”
So, I got to work on getting some measurements together to make a pattern for women.
I didn’t know if I wanted to add the ruffle for the adult version, so I did a little poll on my Facebook page. An overwhelming majority said they wanted the ruffle. A few didn’t, and a few said to make it optional. So, that’s what I did! Below you will find measurements for a ruffle option and a no ruffle option.
Linen Fabric
When I did the tutorial for the DIY cross back apron for girls I bought a 55% linen 45% cotton blend. Prior to making that I only ever used 100% linen, like for this dress and this blanket. I decided that I can hardly tell a difference between the two. Since the blend is so much less expensive, I decided to go that route again for this adult pinafore apron tutorial.
I like the Kaufman Essex Yarn Dyed Linen on Amazon. It is available in every color you can imagine, and for a great price.
I bought two yards and still had some leftover.
Cross back Apron pattern Cut List
You will need two yards of fabric to make this apron.
Ruffle Option
Main piece 41″ wide by 28″ long- Cut 1
Ruffle 62″ long by 8″- Cut 1
Straps 21″ long 7.5″ wide- Cut 2
Pockets 10″ by 10″- Cut 2
No Ruffle Option
Main piece 41″ wide by 35″ long
Straps 21″ long 7.5″ wide- Cut 2
Pockets 10″ by 10″- Cut 2
Cross Back Apron for Women Sewing Instructions
Start by cutting the pieces from the cut list.
Prepare the straps
Take one strap piece (21″ by 7.5″) and fold it in half long ways. Sew the raw edges together all the way down the long edge with a half inch seam.
Turn the strap piece out, so that the raw edges, and seam, are hidden inside. Do this by placing a large safety pin on one end and fishing it through to the other end.
Press the strap flat with an iron to make the seams lay flat.
Topstitch on both long edges of the strap (the folded edge and the side with the seam).
Repeat with the other strap piece.
WHAT IS A TOPSTITCH?
A topstitch is a stitch that is sewn close to the original seam. It is on top of the garment, or project, and visible when it is complete. Its purpose is to make a seam lay flat. Watch the video tutorial for instructions that show this more clearly.
Prepare the pockets
Press one edge of a 10″ by 10″ piece one half inch, and then another half inch, to hide the raw edge inside. For the other three edges of the square piece press them over one inch.
Sew the spot that you pressed over twice, to create a hem. This will be the top of the pocket. Leave the other three edges un-sewn, as these will be sewn directly onto the main piece of the apron.
Repeat with the other pocket piece.
Prepare the main piece of the apron
Ruffle Option
Press the two short (28″), and one long edge (41″), over one half inch, and then another half inch, to hide the raw edges inside.
Do not press one long edge, as this will be where the ruffle will attach.
Sew down the two short sides with a half inch seam.
Leave the top (pressed edge) open for now, as this is where the straps still need to be placed.
No Ruffle Option
Press all four sides over one half inch, and then another half inch, to hide the raw edges inside.
Sew down the two short sides, and one long side, with a half inch seam.
Leave the top (pressed edge) open for now, as this is where the straps still need to be placed.
Prepare the ruffle (if adding)
Adding the ruffle is optional. If you plan to add it, press one long edge of the ruffle piece over one half inch, and then another half inch, to hide the raw edge inside.
Sew the area you pressed with a half inch seam, to create a hem.
Sew a gather stitch along the other (non-hemmed) long edge.
We will work on attaching the ruffle later.
Strap Placement
Take one strap and pin it 13.5″ from the side hemmed edge of the main apron piece. Put it underneath the pressed top edge of the main piece. This is the one that you left un-sewn earlier.
Take the other strap piece and pin it 13.5″ from the other edge of the main piece.
The two strap pieces should be about 6″ apart.
Sew the strap pieces in place. You will notice that the straps face down toward the main apron piece. To make them face up, away from the apron, flip them up and then sew close to the top of the apron to make them stay put. (Refer to the video for more clear instructions on this.)
Turn the apron over. Take the strap on the left and crisscross it over to meet the outside edge of the main apron piece on the opposite side (like in the photo above). Pin the strap in place.
Repeat with the strap on the right, crisscrossing it over to the other outside edge.
Sew the straps, that are lined up with the outside edge, in place. Flip them up, away from the main apron piece, and sew along the top to keep them up (see photo below).
Pocket Placement
Place the hemmed top of the pocket 14″ from the hemmed top of the main apron piece.
Line up the side of the pocket 10″ from the hemmed outside edge of the main apron piece.
Repeat with the other pocket.
The two pockets should be 2 and 3/4″ apart.
Sew around the three sides, leaving the hemmed edge (the top of the pocket) open.
Attaching the ruffle (optional)
If you chose the ruffle option, it is time to attach it to the bottom (raw edge) of the apron.
Pull the gathering strings, that you put into the ruffle piece earlier, until the length of the ruffle matches the width of the apron.
Pin the ruffle in place, right sides together.
Sew all the way down, to attach the ruffle to the apron.
Finish the raw edges with a serger or zigzag stitch.
For more details on making ruffles, if you are a beginner, see THIS VIDEO.
And that’s it!
Enjoy your new apron.
Be sure to subscribe to my Youtube channel to always be the first to see new videos from the farmhouse!
This post contains affiliate links. See my full disclosure HERE.
Get more apron patterns from the farmhouse
DIY Pinafore Apron For Girls Free Pattern
Cross Back Apron Pattern for Women- with video!
Equipment
- Sewing machine
Ingredients
- 2 yards linen fabric
Instructions
RUFFLE OPTION
- Main piece 41″ wide by 28″ long- Cut 1Ruffle 62″ long by 8″- Cut 1Straps 21″ long 7.5″ wide- Cut 2Pockets 10″ by 10″- Cut 2
NO RUFFLE OPTION
- Main piece 41″ wide by 35″ longStraps 21″ long 7.5″ wide- Cut 2Pockets 10″ by 10″- Cut 2
CROSS BACK APRON FOR WOMEN SEWING INSTRUCTIONS
- Start by cutting the pieces from the cut list.
PREPARE THE STRAPS
- Take one strap piece (21″ by 7.5″) and fold it in half long ways. Sew the raw edges together all the way down the long edge with a half inch seam. Turn the strap piece out, so that the raw edges, and seam, are hidden inside. Do this by placing a large safety pin on one end and fishing it through to the other end.
- Press the strap flat with an iron to make the seams lay flat. Topstitch on both long edges of the strap (the folded edge and the side with the seam). Repeat with the other strap piece.
PREPARE THE POCKETS
- Press one edge of a 10″ by 10″ piece one half inch, and then another half inch, to hide the raw edge inside. For the other three edges of the square piece press them over one inch.
- Sew the spot that you pressed over twice, to create a hem. This will be the top of the pocket. Leave the other three edges un-sewn, as these will be sewn directly onto the main piece of the apron.
- Repeat with the other pocket piece.
PREPARE THE MAIN PIECE OF THE APRON
RUFFLE OPTION
- Press the two short (28″), and one long edge (41″), over one half inch, and then another half inch, to hide the raw edges inside. Do not press one long edge, as this will be where the ruffle will attach. Sew down the two short sides with a half inch seam. Leave the top (pressed edge) open for now, as this is where the straps still need to be placed.
NO RUFFLE OPTION
- Press all four sides over one half inch, and then another half inch, to hide the raw edges inside. Sew down the two short sides, and one long side, with a half inch seam. Leave the top (pressed edge) open for now, as this is where the straps still need to be placed.
PREPARE THE RUFFLE (IF ADDING)
- Adding the ruffle is optional. If you plan to add it, press one long edge of the ruffle piece over one half inch, and then another half inch, to hide the raw edge inside. Sew the area you pressed with a half inch seam, to create a hem. Sew a gather stitch along the other (non-hemmed) long edge. We will work on attaching the ruffle later.
STRAP PLACEMENT
- Take one strap and pin it 13.5″ from the side hemmed edge of the main apron piece. Put it underneath the pressed top edge of the main piece. This is the one that you left un-sewn earlier. Take the other strap piece and pin it 13.5″ from the other edge of the main piece. The two strap pieces should be about 6″ apart. Sew the strap pieces in place.
- You will notice that the straps face down toward the main apron piece. To make them face up, away from the apron, flip them up and then sew close to the top of the apron to make them stay put. (Refer to the video for more clear instructions on this.)Turn the apron over. Take the strap on the left and crisscross it over to meet the outside edge of the main apron piece on the opposite side (like in the photo above). Pin the strap in place. Repeat with the strap on the right, crisscrossing it over to the other outside edge.
- Sew the straps, that are lined up with the outside edge, in place. Flip them up, away from the main apron piece, and sew along the top to keep them up (see photo below).
POCKET PLACEMENT
- Place the hemmed top of the pocket 14″ from the hemmed top of the main apron piece. Line up the side of the pocket 10″ from the hemmed outside edge of the main apron piece. Repeat with the other pocket. The two pockets should be 2 and 3/4″ apart. Sew around the three sides, leaving the hemmed edge (the top of the pocket) open.
ATTACHING THE RUFFLE (OPTIONAL)
- If you chose the ruffle option, it is time to attach it to the bottom (raw edge) of the apron. Pull the gathering strings, that you put into the ruffle piece earlier, until the length of the ruffle matches the width of the apron. Pin the ruffle in place, right sides together. Sew all the way down, to attach the ruffle to the apron. Finish the raw edges with a serger or zigzag stitch.
- Enjoy your new apron!
Notes
- I like using a linen blend because I think it feels great and works just as well as pure linen, but is much more affordable.
Nutrition information is automatically calculated, so should only be used as an approximation.
I love all your tips for real simple living style and I am a 53 year woman love you are taking care of your kids I did the same have 4 and 3 grandkids love your teaching for iron skillet, food I’m Hispanic and love home food and farmhouse living style Good bless you
What about a pattern for men to wear in the kitchen?
I personally would say that without the ruffle this apron is pretty unisex. Pick yourself a “manly” color or print! My husband has a tan/beige colored and a denim apron for cooking. Before he was always splattered in sauce. He also has one patterned after the “home depot” employee apron.
Good Morning Ladies. As someone who has sewn for longer than I should ever admit, I am thrilled to see young people embracing quality self-sewn items. Like all projects, when you break them down into manageable sections you will quickly see that it is not difficult, it is a process. May I interject a fabric choice? I make many aprons, since I am retired now my day starts with an apron over clothing. I have aprons that I wear only with gardening, aprons that I wear only for studio work and others just for cooking. Now I have discovered that using quilting cotton is the perfect alternative to pricey linen. My fabric is most often purchased in a quilt shop (I am a quilter) but the higher quality fabrics in some chain stores is a good substitute. You want a fabric that can tolerate lots of washing. Jump in, keep it simple, this pattern is a good place to practice your skills just take your time, enjoy the process.
Oh yes, I love good old quilter’s cotton. Nothing wrong with that! 🙂
Nice blog with some great ideas, but I have never seen anyone iron on a hardwood floor!
Haha That’s what i’ve always done!
And I always put a towel down to iron on my hardwood floor.
I have my pinafore linen apron from LinenMe (https://www.linenme.com/linen-aprons), but after reading this I’m tempted to make one myself.
is this in the indigo color or denim? i love it!
Just found this. But I’m 5’3 and wear about a size 2x (Walmart size). I doubt your pattern would fit me! How about the size of your pattern, how to adjust for bigger (or smaller)? I have 2+ yards of linen or blend. I sew (used to take in some sewing). I love the pinafore that RoughLinen sells but can’t afford. Thanks.
Just increase the width a little, and strap length to accommodate. You want the main piece to overlap about four inches in the back, so measure accordingly. Hope that helps!
Did you happen to make the 2x version? I’d love to get the measurements for your pieces?
I would like the measurements for 1x
Thanks
Another timely project! I just ordered a Japanese apron on etsy! But I am so happy to see this, as I definitely want to make more, and I already have the linen!
Your blog is my favorite!
Karen
First let me say that I love your blog! I was so happy to see the pinafore apron pattern. I have wanted one of these for so long but I just could not get myself to pay $75 for a apron. Thank you for such great detail in explaining how to sew one of these. Just have to wait for the fabric and I’ll be on my way to a darling apron.
Is there any chance that you might be selling some of these beautiful aprons in the future? (Ruffle-free, pleeeese). ?
Do you have measurements for extra large?