How to Make a Basket Liner

Sewing your own home decor allows the opportunity to choose custom fabrics for your style. Read on to find out how to make a basket liner. It is simpler than you think!

How to make a basket liner video tutorial

I first shared these baskets, with their ruffle linen liners, in my Laundry Room Cabinet Organization post. I had tons of people ask me how to make them. Sooo…without further ado, let’s get into the tutorial!

This post contains affiliate links, which means I make a small commission at no extra cost to you. Get my full disclosure HERE.

Supplies

Basket- You can use any basket you have around your house. I bought these Seagrass Baskets for this tutorial.

Fabric- Any non-stretchy lightweight- medium weight fabric will do. I used this Linen Blend.

How to make a basket liner instructions

1. Measure the basket.
2. Cut out the pieces.
3. Sew the liner together.
4. Finish with an optional ruffle and tie.

Getting the measurements

You will need several measurements for this project.

First, find the length and width of the bottom of the basket. If you are using a circle basket, you need the diameter.

To these measurements, add 1″ for seam allowance. For example, if the bottom of your basket measures 9.5″ by 6.5″ cut a piece of fabric 10.5″ by 7.5″.

Next, measure the length and width of the sides of the basket. If it is rectangular, you will have two shorter sides and two longer sides. Normally they are angled, so that the bottom width measurement is 9.5″ (like the width of the bottom of the basket) and the top width measurement is 11.5″, for example.

For the side pieces you also want to account for how far you want the basket liner to come down on the outside of the basket. Since I planned to add more length with a ruffle, I only wanted mine to come down about 2.5″. My basket was 6″ tall, so I made my side pieces 8.5″ long, so they would have that 2.5″ overhang.

Cutting out the pieces

To cut the side pieces shorter at the bottom and longer at the top, use the rectangular bottom piece as a guide, since that is where the side pieces of the basket meet the bottom.

Take one of the smaller side pieces and line it up with the shorter side of the bottom piece. With the side pieces centered, make a mark on both sides. Make little slits with your scissors. Fold the side piece in half and line up the slits. Make an angled cut until you reach the longer edge.

(If all this sounds confusing, check out the video above. It is definitely easier than it sounds!)

Use the same method to cut the other side piece of the liner….line it up with the bottom, make marks and slits, fold in half and make an angled cut.

Once you have one short side, and one long side made, use those as patterns to cut the other two side pieces.

Next, lay all the pieces out with the bottom piece in the center and the side pieces lined up with it.

See how all the side pieces are shorter at the bottom  but angled to be longer at the top? They line up with the rectangular bottom liner piece and then get longer to account for the wider top of the basket. 

Sewing it all together

Next, sew the sides to the bottom. Keep in mind that you want the seams to be hidden inside the basket, so lay the side pieces on top of the bottom piece, and sew with a 1/2″ seam.

Note* If you have a basket where the liner will be visible from the outside, such as a wire basket, the seams should be inside the basket.

After all four side pieces are sewn to the bottom piece, sew each side piece to the next one over.

Finish all the seams with a zig zag stitch or serger.

The basket liner really takes shape at this point.

Next, measure all the way around the basket to determine how long the ruffle should be. The general rule of thumb for ruffles is to make it 1.5 times the length of what you’re attaching it to.

Since my basket was 40″ around, I made my ruffle piece 60″ long. I made it 3.5″ wide.

Making the ruffle

1. Hem the long edge by folding it over 5/8″. and then another 5/8″. Sew with a 1/2″ seam.
2. Put a gathering stitch in the other long edge. Do this by increasing your stitch length, and tension, as high as they can go. If you are brand new to ruffle making, I share some of my thoughts in this video.
3. Gather the ruffles until they are the same size as the perimeter of the basket liner (in my case 40″).
4. Pin and sew in place.

Making the tie

1. Cut a strip about 2″ wide by the length of the basket liner perimeter + about 14″ overhang on each side (to tie the bow). My piece was about 68″. 40″ basket perimeter + 28″ total for the bow.
2. Fold the strip in half (long ways, right sides together) and both the ends under about 1/2″. Sew all the way down the long edge with a very narrow seam.
3. Use a safety pin in one end to push the tie right side out.
4. Fold the tie piece in half to find the center. Find the center of the back of the basket liner. Line the two centers up, and pin in place.
5. Find the center of the front of the basket liner, and mark it with a pin.
6. Starting from the back (the centers) Sew the tie to the basket liner. Line it up just above the ruffle. This also acts as the top stitch, so make sure to sew close to the edge of the tie. Stop a few inches from the front center pin.
7. Repeat going the other way, starting from the back center. Stop the same distance from the front center pin as the previous stitch.
8. Topstitch the top of the tie, again stopping the same distance from the front center pin as the bottom topstitch.
9. Finish the tie off by topstitching the to ends that are not stitched to the liner.

All finished!

This post contains affiliate links, which means I make a small commission at no extra cost to you. Get my full disclosure HERE.

Shop the Supplies

Seagrass Baskets

Linen Blend Fabric

My Sewing Machine

This basket liner can be made for any size basket. Customize it with fabrics that match the space you are decorating. You could even play around with a different color tie and ruffle. The options are endless!

Have you made basket liners? How did it go?

Thank you so much for stopping by the farmhouse!

SaveSaved Pin Print

How to Make a Basket Liner

No ratings yet

By Lisa Bass

Sewing your own home decor allows the opportunity to choose custom fabrics for your style. Read on to find out how to make a basket liner. It is simpler than you think!

Prep: 30 minutes minutes

Total: 30 minutes minutes

Servings: 1 liner

Save this recipe!

Just enter your email and get it sent to your inbox! Plus you'll get new recipes from us every week!

Please enable JavaScript in your browser to complete this form.

Email *

Save Recipe

Equipment

• Sewing machine

Ingredients 

1x2x3x

• ▢ baskets
• ▢ fabric, i used a linen blend

Cook ModePrevent your screen from going dark

Instructions 

GETTING THE MEASUREMENTS

• You will need several measurements for this project. First, find the length and width of the bottom of the basket. If you are using a circle basket, you need the diameter. To these measurements, add 1″ for seam allowance. For example, if the bottom of your basket measures 9.5″ by 6.5″ cut a piece of fabric 10.5″ by 7.5″.
• Next, measure the length and width of the sides of the basket. If it is rectangular, you will have two shorter sides and two longer sides. Normally they are angled, so that the bottom width measurement is 9.5″ (like the width of the bottom of the basket) and the top width measurement is 11.5″, for example.
  
  For the side pieces you also want to account for how far you want the basket liner to come down on the outside of the basket. Since I planned to add more length with a ruffle, I only wanted mine to come down about 2.5″. My basket was 6″ tall, so I made my side pieces 8.5″ long, so they would have that 2.5″ overhang.

CUTTING OUT THE PIECES

• To cut the side pieces shorter at the bottom and longer at the top, use the rectangular bottom piece as a guide, since that is where the side pieces of the basket meet the bottom.Take one of the smaller side pieces and line it up with the shorter side of the bottom piece. With the side pieces centered, make a mark on both sides. Make little slits with your scissors. Fold the side piece in half and line up the slits. Make an angled cut until you reach the longer edge.(If all this sounds confusing, check out the video above. It is definitely easier than it sounds!)
• See how all the side pieces are shorter at the bottom but angled to be longer at the top? They line up with the rectangular bottom liner piece and then get longer to account for the wider top of the basket.

SEWING IT ALL TOGETHER

• Next, sew the sides to the bottom. Keep in mind that you want the seams to be hidden inside the basket, so lay the side pieces on top of the bottom piece, and sew with a 1/2″ seam. Note* If you have a basket where the liner will be visible from the outside, such as a wire basket, the seams should be inside the basket.After all four side pieces are sewn to the bottom piece, sew each side piece to the next one over.Finish all the seams with a zig zag stitch or serger.
• The basket liner really takes shape at this point. Next, measure all the way around the basket to determine how long the ruffle should be. The general rule of thumb for ruffles is to make it 1.5 times the length of what you’re attaching it to.Since my basket was 40″ around, I made my ruffle piece 60″ long. I made it 3.5″ wide.

MAKING THE RUFFLE

• Hem the long edge by folding it over 5/8″. and then another 5/8″. Sew with a 1/2″ seam. Put a gathering stitch in the other long edge. Do this by increasing your stitch length, and tension, as high as they can go. If you are brand new to ruffle making, I share some of my thoughts in this video. Gather the ruffles until they are the same size as the perimeter of the basket liner (in my case 40″).Pin and sew in place.

MAKING THE TIE

• Cut a strip about 2″ wide by the length of the basket liner perimeter + about 14″ overhang on each side (to tie the bow). My piece was about 68″. 40″ basket perimeter + 28″ total for the bow. Fold the strip in half (long ways, right sides together) and both the ends under about 1/2″. Sew all the way down the long edge with a very narrow seam.
• Use a safety pin in one end to push the tie right side out. Fold the tie piece in half to find the center. Find the center of the back of the basket liner. Line the two centers up, and pin in place.
• Find the center of the front of the basket liner, and mark it with a pin. Starting from the back (the centers). Sew the tie to the basket liner. Line it up just above the ruffle. This also acts as the top stitch, so make sure to sew close to the edge of the tie. Stop a few inches from the front center pin.
• Repeat going the other way, starting from the back center. Stop the same distance from the front center pin as the previous stitch. Topstitch the top of the tie, again stopping the same distance from the front center pin as the bottom topstitch. Finish the tie off by topstitching the to ends that are not stitched to the liner.

Notes

• This basket liner can be made for any size basket. Customize it with fabrics that match the space you are decorating. You could even play around with a different color tie and ruffle. The options are endless!

Nutrition information is automatically calculated, so should only be used as an approximation.

Like this? Leave a comment below!

Pin it for later

Sharing is caring!